•Reliable permanent monitoring of the overall vibration to DIN ISO 10816
•Switching output with adjustable switch point and response delay
•Simple switch point setting by means of two setting rings allowing optimum reading
•With analogue current output for vibration velocity
•Clearly visible LEDs for indicating switching status and operation
|Thread||M8 x 1,25|
Measuring range of vibration: 0...25 mm/s; (RMS)
Frequency range: 10...1000 Hz
Current consumption: < 50 mA
Protection class: III
Sensor type: microelectromechanical system (MEMS)
Total number of inputs and outputs: 2
Number of digital outputs: 1;
Number of analogue outputs: 1
Output signal: switching signal; analogue signal
Electrical design: PNP
Output function: NC
Max. voltage drop switching output: 2 VDC
Permanent current rating of switching output DC: 500 mA
Analogue current output: 4...20 mA
Max. load: 500 Ω
Short-circuit protection: yes
Overload protection: yes
Measuring error: < ± 3 % of the final value
Switch point accuracy: < ±4 % of the final value
Repeatability: < 0,5 % of the final value
Linearity deviation: 0,25 %
Response time: 1...60 s
Adjustment of the switch point setting ring
Ambient temperature: -25...80°C
Note on ambient temperature
UL application: < 80 °C
Storage temperature: -25...80°C
Protection: IP 67
We do not show our whole range of products and services in our web shop. If you cannot find what you are looking for please do not hesitate to contact us, as we are pleased to help you!
Please enter the required details of the article you are looking for, e.g. manufacturer, type, specification.
We will gladly consider if it is possible for us to add the requested article into our shop offer.
As soon as we have got the necessary information we will contact and inform you.
Alternatively - if possible - we are looking forward to create an individual offer that will be of your interest.
We are looking forward to your request.
Your EAS team