• IP40 rating
• Intermittent operating mode
• Average life 10,000 hours at 50 deg C
• Direct mounting on to the burner
• Comes with flange camp
QRA Datasheet
Robust valve control device giving a confidence in reliable performance and outstanding durability under harsh working environments
- Easy maintenance
- Precise calibration with simple SPAN and ZERO adjustments
- Simple conversion to direct acting or reverse acting
- 1/2 split range available
- Rugged aluminum housing with corrosion-resistant coating...
Probe Type: Single/Dual (Configured on installation)
Phase Sense: Yes
Voltage: 230V
Flame Sensitivity: 1 - 2 uA
Purge: 12 Seconds
Ignition: 6 Seconds
Rest Switch: None
CE Approved
RoHS Compliant
CE Approved
Pactrol CSS2 manual
SDOAH040MSSFKPG
Gold-plated contacts for a secure connection
High degree of protection to meet the requirements of harsh environments
Efficient stress relief thanks to patented 3-way ball clamp technology
Simple and fast wiring with screw terminals
EVC811 data
ignites and monitors directly ignited industrial gas burners of unlimited capacity
safety time for start-up: 3, 5 or 10 s, safety time for operation: 1 s,
Mains voltage:
100 V AC, 115 V AC, 200 V AC or 230 V AC, for earthed or unearthed mains
IFD 258 manual
SDOGH040MSSFKPG
Gold-plated contacts for a secure connection
High degree of protection to meet the requirements of harsh environments
Efficient stress relief thanks to patented 3-way ball clamp technology
Simple and fast wiring with screw terminals
EVC810 data
SID10ABBFPKG/US-100
• The unit detects the flow speed to the calorimetric measuring principle and
switches the output
• If the flow speed increases, the switching status changes when the switch point
is reached
• If the flow speed falls again, the switching status changes if the value "SP
minus hysteresis" is reached
SI500A manual
ML441-11Y-T-2512Part no.: 1065616
Heavy duty limit switch, with Metal Roller Lever
Actuator head can be repositioned in steps 4 x 90°
Galvanized cast iron enclosure
ML441-11Y-T-M20 Data sheet
Part no.: 1065616
Number of lines per revolution 1,024
Reference signal, number1
Reference signal, position 90° electric, logically gated with A and B
Measuring step deviation ± 0.01°
Connection type Cable, 8-wire, radial, 1.5 m
VFS60B-TDCK01024 Data sheet
Nominal input voltage UN 24 V DC
Typical input current at UN 7 mA
Typical response time 5 ms
Typical release time 2.5 ms
Coil resistance 3390 Ω ±10 % (at 20 °C)
REL-MR- 24DC/21 – 2961105 Data sheet
designed for use with aggressive pressure
media found in many industrial and process applications
Integral electronics provide a three-wire 0 to 5 V
(PMP 1400) or two-wire 4 to 20 mA (PTX 1400)
PTX1400 Data sheet
5/8-18 UNF-2A Threaded
Thread Length 3.86 in. [98mm]
Harness 1 ft. [0.3m]
Flying Leads Aluminum Clear Anodized
GAC Data sheet